Carpets add luxury, beauty and warmth to your home. However a carpet has to be well maintained to prolong its life, which many people think is difficult to do considering the number of threats it faces like liquids, foods and other staining materials.

On the contrary, carpet cleaning is easy. It’s just that most people don’t know how to properly clean or maintain a carpet. They end up doing more harm than good by using the wrong cleaning methods, wrong carpet cleaners and cleaning stains wrongly.

To help you avoid making these mistakes, here is a list of things you should never do while cleaning your carpet.

ProcrastinationProcrastination

Procrastination is a vice in everything you do, including removing stains. Stains have to be dealt with as quickly as possible as if you are late at taking action, the stain only ends up getting soaked into the carpet fibers. Once dry, the stain sets well into the carpet and is rather difficult and tricky to remove.

 

No tests before removing stainsNo tests before removing stains

You never know how even home-made stain removers will work on your carpet. This is why you need to first test the stain remover on an inconspicuous area of the carpet before using it on the stain. This way you not only know if the stain remover will damage your carpet, the damage is also hidden. So if you have newly fitted a carpet, it’s worth keeping a few cut-offs for future testing purposes.

 

Using over-the-market stain removersUsing over-the-market stain removers

Do avoid using stain removal products sold in supermarkets as they don’t work and actually cause damage to the carpet fibers by color-bleeding. It’s safer and better buying and keeping a general stain removal product from a professional carpet cleaning company for emergencies. More information on http://deevora.com/how-to-choose-best-carpet-shampooer/

Rubbing or scrubbing stainsRubbing or scrubbing stains

It is really tempting rubbing into stains which don’t seem to shift. However this is a no-no in carpet cleaning as it spreads the stain to worsen things. Moreover rubbing damages the carpet fiber to leave it looking scuffed as carpets are made of tightly wrapped fibers which are sealed with heat. Scrubbing or rubbing the stain only undoes the locks to ruin your carpet. This is why it’s advised to not rub or scrub stains, but to use a paper towel or a clean, white or colorfast towel to blot out stains.

Using cheap rental machines to clean your carpetUsing cheap rental machines to clean your carpet

Don’t think that you will save money renting a cheap carpet cleaner to clean your carpet. This decision of yours may lead to your spending more money as rental machines are usually underpowered.

They do not clean the carpet as deeply and as well as better-quality machines. The poor suction power of the cleaner leaves the carpet staying wet for a longer time. This in turn can shrink the carpet and lead to the formation of mold and completely damage your carpet. As example you can rent machine on official site.

Wearing shoesWearing shoes

Don’t make the mistake of walking across your carpet with your shoes on as it only brings with it dirt, grime and other similar particles which dirty your carpet and shorten its life. It’s better to designate some place near the door for people to leave their shoes before entering the house.

 

Using ‘all-purpose’ cleaners

Though you may think it’s safe using all-purpose cleaners, you aren’t. Most of the time these leaners are restricted for use only on hard surfaces like tile or hardwood. Using it to clean your carpet may leave you with a much worse stain than you’d started out with!

Dragging furnitureDragging furniture

While you do need to remove your furniture from the carpet before cleaning it, it doesn’t imply that you should drag it across the carpet! This may only lead to ripples in the carpet and probably some tears and rips. Instead, just lift the furniture before moving it.

In case it’s something heavy, place a plywood sheet in front of the item, and walk it onto the plywood. Then place a second sheet in front of the first and maneuver the furniture onto the second sheet. Repeat by once again placing the first plywood sheet in front of the second and continue till the furniture is relocated as needed.

Over-shampooingOver-shampooing

Over-shampooing of the carpet occurs either if too much shampoo is used or if the shampoo isn’t properly rinsed. The build-up of soap residue is not only difficult to clean, but it becomes a virtual dirt magnet.

Over-wetting

This occurs when too much of water soaks to the bottom for the carpet. This can make some carpets shrink and practically tear from the floor while the backing materials of some carpet start discoloring when too wet. Carpets with wet backing and pads are very difficult to dry and risk leading to mold and mildew problems.

Placing furniture on wet carpetsPlacing furniture on wet carpets

Don’t make the mistake of placing your furniture on the carpet before it dries as some wood furniture may release some of its stain dyes when it comes in contact with the wet carpet. There are also some pieces of furniture with partially metal feet; leaving these furniture on wet carpets can lead to the metal rusting and leaving a stain on the carpet. This is why furniture is best lifted and kept aside before cleaning carpets.

While the vacuum beater bar or power head helps improve the appearance of cut-pile carpets like friezes and saxonites but is harmful to use in looped styles of carpets like Berber. The bar itself may not cause much for a problem in a Berber. It’s just that if there is an existing unnoticed snag in the carpet, there is a chance of the beater bar grabbing the loose strand and wrapping around its rotating bar. The beater bar may continue pulling the strand to cause a run in the carpet. This problem can be solved by switching off the beater bar in the vacuum, if possible, or replacing it with a suction-only vacuum head.Using A Beater Bar

While the vacuum beater bar or power head helps improve the appearance of cut-pile carpets like friezes and saxonites but is harmful to use in looped styles of carpets like Berber. The bar itself may not cause much for a problem in a Berber.

It’s just that if there is an existing unnoticed snag in the carpet, there is a chance of the beater bar grabbing the loose strand and wrapping around its rotating bar. The beater bar may continue pulling the strand to cause a run in the carpet. This problem can be solved by switching off the beater bar in the vacuum, if possible, or replacing it with a suction-only vacuum head.

So it’s not actually difficult cleaning your carpet. You just need to know how to do it right and as you know what you should not do while cleaning your carpet, you can’t make a mistake!

Some Things Not To Do While Cleaning Your Carpet
Rate please